Do you want to save on stock management for large quantities and only order the production portion you need?
With our range of Aluminum Bars, you can also order individual Aluminum bus bars or small quantities of Alu Bars from buzzbar. Our product procurement is distributed among various suppliers due to the risk of failure. Our dealer structure is tested and approved. Our AlMgSi0.5 [EN-AW6060] Aluminum Bars have a standard length of 6000 mm, while our AlMgSi1 [EN-AW6082] Alu Bars have a standard length of 3000 mm. All semi-finished products are provided for you on special wooden racks. At buzzbar®, we take care of commissioning and delivery immediately after receiving your order.
Aluminum Bars serve as raw material for the manufacture of busbars or other products. The procurement of smaller quantities is usually not possible.
Our solution: Order semi-finished products from the buzzbar standard product range and get only what you really need. With a standard length of 6000 mm or 3000 mm, you can be flexible in your further processing. Shorter Aluminum Bars can be found in our cut-to-size range.
As an alternative to copper busbars, it is also possible to use aluminium as a conductor. Aluminium busbars have the advantage over copper that they are much lighter.
The assembly and handling of aluminium busbars is very easy due to their low weight. However, low density also means that the cross-section must be significantly larger than copper for the same amount of current.
The silvery light metal is ideally suited for all non-cutting manufacturing processes. Aluminium corrodes within a short time. For this reason, thorough pre-treatment is important!
Material EN-AW6060
Material EN-AW6082
Semi-finished products with material EN-AW6101B, alloy E-AlMgSi0,5 only on request!
The standard length for AlMgSi1 [EN-AW6082] is 3000 mm and 6000 mm for AlMgSi0.5 [EN-AW6060]. Other dimensions are available as saw cuts on request. The current carrying capacity according to DIN 43670 applies to Aluminum Bars.
* Current load values: Ambient temperature 35 °C, AC current AC.
Heating of the conductor busbar as a function of: Current intensity, ambient temperature, heat dissipation, type of routing, installation, application Multiplication factor 1.72 when using 2 busbars, multiplication factor 2.25 when using 3 busbars in parallel arrangement.
After a successful request, you will receive your offer within one business day by e-mail.
Check your buzzbar offer and confirm your busbar order by e-mail.
You will receive your busbars according to the buzzbar standard within seven working days.
by EMS Elektro Metall Schwanenmühle GmbH
Schwanenmühle
66851 Horbach
Germany
Mon. – Thurs. 08:00 – 16:00
Fri. 08:00 – 15:00
P: +49 6307 59143–0
E: info@buzzbar-online.com
The EMS Group is certified by ISO 9001.
